FILL SAVE 600 with integrated compressor
Following several accidents caused by bursting pressure vessels during the filling process, explosion protection during cylinder filling has already become a requirement or standard in many countries.,
The IDE FILL SAVE 600 C safety filling station, made of high-strength “double layer” special steel with hydropneumatically controlled safety doors, protects filling personnel from bursting or exploding pressure vessels during the filling process.
The individual compressed gas cylinders are easily accessible in the filling box. The filling connections are automatically venting filling valves with safety filling pipes, flow stop and 0.8 m filling hoses.
A sophisticated two-hand safety system, controlled by a microprocessor, protects against incorrect operation. The entire filling system is operated via an intuitive electronic control system and pushbuttons on the control panel with the following range of functions: auto stop when the final pressure is reached, automatic electronically controlled condensate drain, Airsave Pro E electronic, sensor-controlled filter saturation monitoring.

The FILL-SAVE 600 C also features an integrated compressor with an air displacement of 320L/min.

Air delivery 320 L/min, 19.2 m³/h, 11.3 c.f.m., 225/330 bar.

The integrated high-pressure compressor is installed on a platform that can be pulled out for servicing.
Highly efficient through continuous development for over 3 decades, proven in use thousands of times, and popular.

High-strength aluminum compressor block with a forged crankshaft mounted in large-diameter industrial roller bearings, forged aluminum connecting rods with double-acting bearings, aluminum pistons; in the first and second compression stages, aluminum cylinders with NICASIL-coated, specially honed running surfaces; free-floating pistons in the third compression stage; special cylinder heads with reduced dead space; large, robust valves that ensure rapid air exchange, special, highly effective cooling via stainless steel coolers, and dual lubrication using oil spray lubrication and a low-pressure oil pump operating at a maximum of 3 bar when cold and 1 bar when warm. This results in a significantly lower oil content in the compressed air. All these features enable us to generate more power than most competitors at the 105% level, often with the same drive power.

Robust design, extremely long maintenance intervals, good accessibility of components for simple and fast maintenance, readily available spare and maintenance parts worldwide at all times, and much more make this compressor block one of the most popular and best-selling professional blocks worldwide.

Triple-Plus re-dryer system FT 410 A for approx. 1400 m³ (@20°C), pure air according to DIN EN 12021:2014, (with appropriate intake air with approved CO2 content) with Airsave Pro E filter cartridge saturation monitoring.

V-belt drive:
Drive: three-phase AC motor 400V 7.5 kW 50/60 Hz, noise level approx. 82 dBA at a distance of 1.5 m.

Included in delivery:
Drier cartridge FT 410 A, compressor oil, detailed manual, parts manual, compressor logbook, filling log and certificates.

Optionally available at an extra charge:

Dimensions of the complete system: 1500 x 980 x 1885 mm, weight 430 kg.

FILLSAVE 600 Certified by the DEKRA Approved Inspection Body
HS CODE 8414 9000