Only a few days left - our COMPETITION: Great prizes for divers and fire departments.

TFI

Semi-Silent Professional high-pressure breathing air compressor, noise-reduced version 84 dbA (also available as a tropical version).

In response to numerous customer requests for a smaller stationary filling system, we have a new one TFI model added to our portfolio. An absolutely robust, reliable and low-maintenance professional filling system with an excellent performance balance and energy efficiency. And the best thing: we are the only manufacturer in the world to offer a 3-year guarantee.

Frame and cabin:

  • 2 - 4 mm powder-coated sheet steel. Color: RAL 9005. Maintenance-friendly flaps on both sides.
  • Noise insulation through heat- and oil-resistant special insulation 20 mm, decoupled from the floor using shock absorbers.
  • Compressor unit and drive unit decoupled from the base frame using oscillating elements.

Technical data compressor unit:

  • Air liter output: 320 l/min = 19.2m³ - 11.3 CFM
  • maximum working pressure: 420 bar
  • Revolutions / Min. 1580
  • Compressor block, completely made of aluminum with aluminum cylinders.
  • Safety valves after each compressor stage.
  • Type-tested and TÜV-tested ultimate pressure safety valve.
  • Robust rolling bearings (not ball bearings)
  • Cylinder liners made of aluminum with NICASIL coating.
  • 3 compressor stage with free-flight pistons and special piston rings.
  • Intercooler lines made from special stainless steel alloys.
  • Micronic intake filter

Lubrication:

  • Double lubrication with maintenance-free low-pressure oil pump with metal micro-particle oil filter as well as sling pin lubrication with two counter-rotating oil sling pins, oil volume 2 liters

Air-gas treatment:

  • Micronic intake air filter, intermediate separator after 1st, 2nd and 3rd compressor stage, 5 liter collecting container.
  • FT 410 three-stage breathing air dryer system, dryer capacity approx. 1200 m³ at 20° C filter wall temperature.
  • The dryer saturation is monitored using Airsave PRO E, a moisture sensor integrated into the filter cartridge for dryer cartridge monitoring in the dryer housing.
  • Optionally, the air quality can be monitored using AIRSAVE ULTIMATE, a monitoring system integrated into the compressor for dryer cartridge monitoring in the dryer housing, absolute humidity in mg/m³, dew point, CO content, CO² content and O² content of the compressed gas and controls the compressor.
  • An oil sensor can also be optionally switched on for all oils, including residual oils up to 0.001 mg/m³.
  • The ambient air to be sucked in can also be optionally monitored for CO2, SO2 NO and flammable gases. Cylinder arrangement: W shape
  • Intermediate separator 1, final separator 1
  • Safety valves for each compression level

Lubrication:

  • Low pressure gear oil pump with oil filter + additional sling pin lubrication

Control:

  • IDE HMI- High ERfficient, control
  • Monitor. u Controlling the final pressure, which can be infinitely adjusted on the display,
  • Control and monitoring of the automatic condensate drain system,
  • the level of the lubricating oil in the crankcase,
  • Control and monitoring of the star/delta motor control,
  • optional monitoring of the breathing air dryer cartridge change intervals with shutdown,
  • Monitoring the amps during operation to avoid damage to the system,
  • the direction of rotation (phase sequence),
  • the temperature in the compressor silent cabin,
  • optional - control and monitoring by AIRSAVE ULTIMATE air quality monitoring.

Drive:

  • Asynchronous three-phase motor IE3 400 V, 50 Hz, 5.5 kW, B3 IP 55, taper drive belt pulley with SPA V-belt.

Filling system:

  • 2 filling hoses with ventable safety filling connections DIN 300 bar

Accessories included:

  • Dryer housing key, detailed operating manual, parts manual, compressor log book, compressor filling book, declaration of conformity.
  • Certificates for safety valves, hoses, separators, dryer unit, air quality and leak testing.
  • Dryer cartridges 1 x FT 410 A
  • Dimensions: LWH 1100 x 720 x 900 mm, weight approx. 190 kg.
arrange an appointment for consultation

We are out!

We are on vacation from August 9th to 27th. But don't worry, the emergency service is available by email office@ide.de always available for you.
You can purchase consumables and spare parts at any time in our webshop "www.ide.de/shop" order.
We will be available for you again from August 30th.