Trainings

Reasonable and essential: IDE Compressors Manufaktur trainings

No question, training costs money. One can invest money in machinery, cars or real estate. However, you could also invest money in something lasting, something pro- mising to yield immediate profit. Invest in further training.

Trainings

The compressor workshops offered by IDE Compressors Manufaktur are necessary and useful, especially if you want to be able to guarantee safe operation and proper handling of your compressor system. These workshops may even be compulsory for certain divers’ certificates or for fulfilling legal provisions.

At large filling stations and diving centers, failure of a compressor or filling contaminated air due to inadequate or inexpert maintenance, usually causes an immense loss of image and financial losses – this can only be prevented by profound technical knowledge and proper handling of the compressor system.

Compressors have no overly complicated construction – the basic knowledge taught at our workshops should be well sufficient to properly run the compressor, and carry out the most important maintenance and smaller repair work.

Why high-pressure compressor workshops?

Breathing-air, clean and pure in compliance with DIN 3188 or EN 12021, respectively, is the best starting point for a safe dive. To ensure this, two basic prerequisites must be met: a filling station in compliance with strict technical regulations and proper operation. Most of all, all applicable safety requirements must be observed strictly and thoroughly. Inexpert operation and subsequent failure of the compressor not only costs money, but also poses a risk of injury to personnel and divers.

The skills you will learn during the practical parts of the workshops, and the technical knowledge from the theory parts, will help you operate and maintain a compressor system safely, competently and in compliance with the relevant regulations.
The theory part explains facts and functions of the compressor, as well as the legal provisions relevant to the operation of a filling station for breathing-air. Knowledge of these provisions is indispensable for all operators and will therefore be an important focus in our workshops. In the practical part we will teach you how to carry out the type of maintenance work, the manufacturer scheduled to be done by the operator, and the necessary skills and knowledge to do smaller repairs in consultation with the manufacturer.

Who can and may participate in IDE Compressors Manufaktur workshops?

The German Betriebssicherheitsverordnung (operational safety regulations) and its provisions require the owner and operator of a breathing-air compressor to be responsible-minded. Legislature therefore prescribes a minimum age of 18 years (BetrSichV § 2 – German operational safety regulations). Indispensible prerequisites to operate a filling station properly and within the law, are technical interest, basic technical knowledge and skills, and the ability to logically apply technical facts and functions. It is favorable, if the participant himself/herself needs breathing-air for professional or recreational activities, and thus knows exactly what a customer needs. If you ever dived with bad air, you know how disagreeable and dangerous this can be, and you will certainly endeavor to avoid improper filling and inexpert maintenance of system and filters.
In view of the constantly changing legal provisions, technical innovations and developments, we recommend to refresh and update your knowledge and skills every two or three years. After participation in two IDE Compressors Manufaktur workshops, you will receive a 20 % discount on the current workshop prices.

Operators training

Topic:Operators’ training for high-pressure compressors and filling systems
Seminar:Operators’ Training, focus on theory
Target group:Participants from sectors like scuba diving, industry, breathing-air in general. In particular operators of high-pressure compressors and filling stations, who want to troubleshoot and professionally repair their systems, e.g. equipment managers at fire brigades, police, dive clubs, pressure chambers, industrial clients.
This training teaches you the knowledge and skills to become a “qualified person as per Ordinance on Industrial Safety and Health”. It is a prerequisite for the technical trainings and for scuba instructor qualification.
Content:Basic functioning of filling systems and high pressure compressors, Safety regulations of current laws and standards, Accident prevention regulations, Rules on maintenance and installation, Hazard analysis – case studies, How to order the correct expendables
Speaker:Stephan Adam, IDE-Kompplan, Compressed Air Solutions, Expert and “Qualified Person” as per § 32 risk and hazard assessment pursuant to industrial safety regulation,
Dates:October 08, 2018
Time:9:00 a.m. – 4:30 p.m.
Location:IDE- IDE-Kompplan, Compressed Air Solutions, Auf der Gröb 5, D-83064 Raubling
Number of participants:Max. 12 participants, in order of receipt of payment, Min. 6 participants
Entry fee:320 EUR/net per person, If booked in combination with the basic technical training on the following day: € 610,00 for both trainings. Participants in all 4 seminars receive a special price of 1’500 € for the entire seminar week.
incl. seminar material, drinks, afternoon coffee and certificate of participation
Notes:After successful completion participants will be able and authorized to competently operate a filling system and to independently provide the mandatory annual instructions for filling personnel on running the filling system in accordance with the Ordinance on Industrial Safety and Health.
Upon successful completion the participants receive a certificate (valid for 3 years)

Technologic Training BASIC

Topic:Compressor technology -filling systems (Breathing-air, scuba and industry)
Seminar:Technical Training BASIC
Target group:Participants from sectors like scuba diving, industry, breathing-air in general. Participants of the operators’ training and persons with extended experience in operating high-pressure compressors, who want to extend their knowledge and skills with regard to troubleshooting and fault correction. Also who want to complete and update their knowledge and skills with regard to pure breathing-air in acc. with DIN EN 12021:2014 and/or ISO 8573-1.
Content:Theory:
• Basic functioning of breathing-air compressors
• Legal and manufacturer’s instructions on maintenance and installation
• Breathing-air standard DIN/EN 12021-2014
• Safety regulations of the Ordinance on Industrial Safety and Health and Technical Regulations for Operational Safety
• Accident prevention regulations
• Instructions on maintenance and installation
• Troubleshooting, remedies and repair in case of malfunction
Practice:
• Disassembly, examination, reassembly and test run of a breathing-air compressor unit (T120_4-7,5 or T121_3-7,5) and a compressor from the TMI series
• Electrical components, adjustment of electronic controls
• Discussion of particular customer problems
After successful completion you will receive a certificate to prove you acquired knowledge of a “qualified person” and that you are authorized to operate an IDE compressor system (valid for 3 years).
Speaker:Stephan Adam, IDE-Kompplan, Compressed Air Solutions, Expert and “Qualified Person” as per § 32 risk and hazard assessment pursuant to industrial safety regulation and Daniel Maltzahn, responsible trainee for technology and service in IDE Compressors Manufaktur GmbH.
Dates:October 09, 2018
Time:9:00 a.m. – 4:30 p.m.
Location:IDE-Kompplan, Compressed Air Solutions, Auf der Gröb 5, D-83064 Raubling
Number of participants:Max. 10 participants, in order of receipt of payment, Min. 4 participants
Entry fee:350 EUR/net per person
incl. seminar material, drinks, afternoon coffee and certificate of participation. If booked in combination with the operators’ training on the previous day: € 610,00 for both trainings. Participants in all 4 seminars receive a special price of 1’500 € for the entire seminar week.
Notes:In this training participants gain the additional competence to define and operate different compressor controls, to determine mechanical and electrical faults and to run a breathing-air analysis.
Upon successful completion the participants receive a certificate (valid for 3 years)

Compressor technology – Professional

Topic:Compressor technology – Advanced (Breathing-air, scuba and industry)
Seminar:Technical Seminar Professional
Target group:Service technicians from sectors like scuba diving, industry, breathing-air in general. Participants of the basic technical training and persons with extended experience in operating high-pressure compressors, who want to extend their knowledge and skills with regard to the technical structure and functions of the compressor.
Content:• Troubleshooting in prepared units
• Instructions for installing and setting up compressor systems
• Treatment, analysis and monitoring of breathing-air
• Technical instructions on handling and functions of the new IDE air-quality monitoring system AIRSAVE ULTIMATE
• IDE AIRSAVE ULTIMATE, AIRSCRUBBER CO2 + AIRSCRUBBER CO2/C
• Technical instructions on handling and functions of the new IDE TCC-Control Generation IDE HIGH END HMI-TCC-CONTROL
• Professional fault localization and correction
• Discussion of particular customer problems
After successful completion you will receive a certificate to prove you acquired knowledge of a “qualified person” and that you are authorized to operate an IDE compressor system (valid for 3 years).
Speaker:Stephan Adam, IDE-Kompplan, Compressed Air Solutions, Expert and “Qualified Person” as per § 32 risk and hazard assessment pursuant to industrial safety regulation and Daniel Maltzahn, responsible trainee for technology and service in IDE Compressors Manufaktur GmbH.
Dates:October 10th/ 11th, 2018
Time:9 a.m. – ca. 4:30 p.m.
Location:IDE-Kompplan, Compressed Air Solutions, Auf der Gröb 5, D-83064 Raubling
Number of participants:Max. 10 participants, in order of receipt of payment, Min. 4 participants
Entry fee:600 EUR/net per person
incl. seminar material, drinks, afternoon coffee and certificate of participation.  Participants in all 4 seminars receive a special price of 1’500 € for the entire seminar week.
Notes:In this training participants gain the additional competence to detect and repair faults, malfunctions and defects of a high-pressure piston compressor, and to adjust and check all safety devices in a high-pressure compressor filling system. Please bring appropriate protective clothing.
Upon successful completion the participants receive a certificate

Professional Operating IDE-Membrane Nitrox System

Topic:

IDE- Membrane Nitrox System w. high pressure Compressor

Seminar:Product Training: Professional Operators
Target group:Participants from the scuba sector.
Persons who use or are interested in a NITROX MEMBRANE high pressure filling system, and who want to operate it competently and safely, e.g. compressor managers, dive shop employees, persons to be entrusted with operating the system or users who want to be authorized to fill Nitrox cylinders. Prerequisites:
successful completion of the compressor technology BASIC training.
Content:Basic function, Operating the system, Safety regulations of the Technical Regulations for Compressed Gases, Ordinance on Industrial Safety and Health, and breathing-air standard DIN/EN 12021:2014, Compressor controls IDE HMI-TC CONTROL with AIRSAVE ULTIMATE OG     Accident prevention rules, particularities for handling O2., Ordering spare parts and consumables, Rules on maintenance and installation, How to handle and remedy malfunctions
Speaker:Stephan Adam, IDE-Kompplan, Compressed Air Solutions, Expert and “Qualified Person” as per § 32 risk and hazard assessment pursuant to industrial safety regulation and Daniel Maltzahn, responsible trainee for technology and service in IDE Compressors Manufaktur GmbH., Thomas Tätzsch, Course Director, Padi Staff Instructor.
Dates:October 12, 2018
Time:09:00 a.m. – ca. 4:30 p.m.
Location:IDE-Kompplan, Compressed Air Solutions, Auf der Gröb 5, D-83064 Raubling
Number of participants:Max. 6-12 participants, in order of receipt of payment, Min. 6 participants
Entry fee:350 EUR/net per person
incl. seminar material, drinks, afternoon coffee and certificate of participation. Participants in all 4 seminars receive a special price of 1’500 € for the entire seminar week.
Notes:Successful completion of this training enables you to competently operate and/or maintain a NITROX MEMBRANE filling system.
Upon successful completion the participants receive a certificate (valid for 3 years)